UTG PRO® P.O.I® 34 mm Picatinny Scope Rings, Medium Profile

Presenting the P.O.I® Precision Optics Interface Rings Series made in USA at UTG PRO®. Never lose zero with our patented P.O.I locking plate featuring dual spring-loaded guide rods and square integral recoil stop. P.O.I top and bottom rings are precision-machined from one piece with the picatinny base to ensure the tightest tolerance inner diameters and a centered mounting base. Full range of heights available for 1 in, 30 mm, and 34 mm tube sizes. Rated for .50 BMG.

• Proudly Designed and Made in USA
• Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 32mm Center Height to Fit Optics with a 34mm Tube, and up to a 63mm Outer Objective
• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings –

A) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction

B) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold

C) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations

• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws Designed with a 22mm Ring Width
• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms
• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize
• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size

NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.

Material: Aluminum/Steel
Pieces: 2
Rail Type: Picatinny
Profile Level: Medium
Ring Diameter: 34mm
Ring Width: 22mm
Max. Scope Outer Dia: 63mm
Screws Per Ring: 4

A: 34mm
B: 22mm
C: 15mm
D: N/A
E: N/A